Industrial & Pipe Wrapping Tape — PVC Film, 4.7 to 10 mil

One family, three jobs

This is the working end of the range. Everything in it is a PVC film with a rubber adhesive, printed on the same coating line as the electrical tape and slit the same way. What changes between the nine grades is thickness, surface finish, colour and whether the grade is printed.

Pipe wrapping is the bulk of it. A glossy film for the pipe itself, a matte film where the surface has to stay readable or the tape has to disappear into the background, and an embossed grade that tears by hand along the wrap instead of needing a knife at the joint.

Floor and aisle marking needs adhesion that survives foot traffic and a scuffing mop, not just peel strength at application. That is why several grades here carry both a marking duty and a wrapping duty in the same row — they are qualified for the traffic, not only for the pipe.

Hazard warning tape is the printed grade, supplied in standard stripes: yellow/black, white/red, white/green and white/black. It is used for lane marking, colour coding, and for sealing, bonding and identifying on the same roll stock.

Thickness is the main decision

The range runs from 4.7 mil to 10 mil. Below about 5 mil you are choosing the cheap end for a dry, indoor pipe that will not be handled. From 6.3 mil up you gain tear resistance and tensile strength, which matters where the wrapped pipe is moved, stacked or stored outdoors. The 10 mil grade is where elongation and tensile step up sharply and the film behaves like a proper wrapping material rather than a label.

Application temperature is printed on the sheet as 32–140 °F for all nine grades. That is the range we quote, and it is a wide one — if your pipe run sits outdoors in a hot climate, say so, because ambient is not the only thing that matters when a wrap sits in the sun for weeks.

One grade carries a material note

The embossed, hand-tear grade (WR-IN-07) is the one we hold as low lead and low cadmium. That is a statement about the material the tape is made from, not a certification name — we will supply the test report and its number rather than ask you to accept the phrase on its own. If your market asks for a document on this grade, tell us which one and we will send what exists.

Before you order

Tell us the pipe diameter and whether it is indoors or outdoors, whether the surface is painted or bare, and whether the wrap stays on or comes off. Those three answers normally settle the grade in one message. If you want a sample run first, ask for two grades at opposite ends of the thickness range — that is usually cheaper than a full trial on the wrong one.